2002 Yamaha GPR
"Slow Lake Boat"
ENGINE
Goal: Single piped GPR with great recreational manors on 87 octane

48mm Ibody Carbs, Primer, taper flame arrestors.
Jetworks Valve setup
MSD wires and stock ignition. Power Valve controller located to rear for water protection.
RPM dual cooling block, alodine gold,  for the jetworks.
MT Delta3 Carbon Fiber Reeds, with adaptor plate.


Back to SLB page.
Steering, Graphics, and Comfort
Electronics
Hull, Steering,Pump, Prop, Intake, Rideplate, Grate/shoe
Engine, Fuel, Spark, Exhaust, Carbs
Modification List
Performance Page

Marks Page
TUNERS:
AssortedLinks
 SearchLinks ForSale TechTips MudHole
The information presented here reflects solely our personal experience with our own personal power toys (motorcycles, atv's, watercraft) and is presented for entertainment purposes only. No information presented here is to be relied upon for issues of rider safety nor to replace the services of a qualified service technician. Any attempts to follow or duplicate any of  these procedures are done so completely at your own risk. By reading the information on this site, you agree to assume  complete responsibility for any and all actual or consequential damages that may arise from any information presented herein.